Automatic anode jacking frame has achieved the process of raising the bus mechanistic and automatic



Automatic busbar lifting frame is invented by Zhengzhou Joda Technology Co., Ltd. The company has overcame many technical difficulties, and developed the new type equipment. The product has its own intellectual property rights and reaches the international advanced level.  It is good adaptability, easy installation , easy to use, easy to maintain .

Automatic anode rack rising beam has achieved the process of raising the bus mechanistic and automatic, only need 2-3 people use the remote control to achieve the process, workers can free from the repeated labor, reduce labor intensity and cost, improve labor efficiency, and reduce the electrolytic aluminum special equipment's security risks.
source: http://www.anodejackingframe.com/product/electrolytic-aluminum-special-equipment.html
Email: info@joda-tech.com
 

评论

发表评论

此博客中的热门博文

the automatic busbar jacking frame is used to lift the anode periodically for aluminum electrolysis industry

图片
Known as the automatic busbar jacking frame , is used to lift the anode periodically for aluminum electrolysis industry. The automatic automatic anode busbar raising frame is regularly lifted by the PTM to the area above the potshell. The frame-equipped devices are handled by remote control for operations such as unscrewing and screwing clamps, clamping of anode rods, getting close to the anode busbar, etc. The automatic anode busbar raising frame is used when the bus bar has reached its lower limit. It clamps the anodes into position while freeing the bus bar, allowing it to be lifted. After several tests and modifications, Patented “JODA” full automatic anode busbar raising frame, came into service in a large aluminium smelter in China since Jan. 2015, as the first automatic anode busbar raising frame in China, and completely fulfilled designed function and has been running smoothly. Advantages The Advantages of the automatic anode busbar jacking frame 1. Lower Labor Cost & Im
阅读全文

Anode Busbar Frame

图片
Anode Busbar Frame Introduction Anode Busbar Frame is using to  raise the anode busbar work periodically. Anode Busbar Frame raise to the upper part of the pot shell to PTM. Anode jacking frame equipment control the function by remote control operation, such as clamping anode rod, close to the anode busbar, release anode grabs and other assignments. When the anode carbon block is minimized, it is necessary to clamp the anodic guide rod in the automatic Anode Busbar Frame and release the busbar, then finish the busbar lifting operation. Structure The automatic Anode Busbar Frame consists of the frame, Anode Busbar , anode grabs, hydraulic station, lifting beams, landing legs, ground supports, etc. All anode grabs springs are installed with the same height and travel distance to ensure the synchronization of all clamps actions. Features: 65 Experiences 1:2 Air Amplifier Full Remote Control Patented Design Significant Energy Saving Turn-Key Solutions http://www.anodejackingframe.com/
阅读全文