the automatic busbar jacking frame is used to lift the anode periodically for aluminum electrolysis industry
Known as the automatic busbar jacking frame, is used to lift the anode periodically for aluminum electrolysis industry. The automatic automatic anode busbar raising frame is regularly lifted by the PTM to the area above the potshell. The frame-equipped devices are handled by remote control for operations such as unscrewing and screwing clamps, clamping of anode rods, getting close to the anode busbar, etc. The automatic anode busbar raising frame is used when the bus bar has reached its lower limit. It clamps the anodes into position while freeing the bus bar, allowing it to be lifted. After several tests and modifications, Patented “JODA” full automatic anode busbar raising frame, came into service in a large aluminium smelter in China since Jan. 2015, as the first automatic anode busbar raising frame in China, and completely fulfilled designed function and has been running smoothly.
Advantages
The Advantages of the automatic anode busbar jacking frame
1. Lower Labor Cost & Improve Efficiency
The operators can be reduced from 11 to 3-4, and operating time can be shortened from 15-20 minutes to 4- 6 minutes, working efficiency is 27.5 times higher and also save significant labor cost (e.g. 1280 x 7 x 12 = 107,520 MYR
4.Saving Electric Energy
For 400KA Potshell, voltage rise during anode beam raising is dropped by 0.5 v if using Automatic ABRF (from 4.5 V to 4.0 V), so 60 KWH can be saved for each time for each pot. If raising anode beam for 20 times in a year for 600 pots, then 60 x 20x 600 = 720,000 KWH can be saved.
5.Saving Maintenance Fee
Anode Effect will be minimized when using Automatic ABRF thanks to the low voltage fluctuation thus damage to anode beam and anode rod can be minimized and curved hood can also be minimized, so great maintenance fee can be saved.
source: http://www.anodejackingframe.com/productnew/beam-busbar-jacking-frame.html
http://www.anodejackingframe.com/productnew/beam-busbar-jacking-frame.html
Advantages
The Advantages of the automatic anode busbar jacking frame
1. Lower Labor Cost & Improve Efficiency
The operators can be reduced from 11 to 3-4, and operating time can be shortened from 15-20 minutes to 4- 6 minutes, working efficiency is 27.5 times higher and also save significant labor cost (e.g. 1280 x 7 x 12 = 107,520 MYR
4.Saving Electric Energy
For 400KA Potshell, voltage rise during anode beam raising is dropped by 0.5 v if using Automatic ABRF (from 4.5 V to 4.0 V), so 60 KWH can be saved for each time for each pot. If raising anode beam for 20 times in a year for 600 pots, then 60 x 20x 600 = 720,000 KWH can be saved.
5.Saving Maintenance Fee
Anode Effect will be minimized when using Automatic ABRF thanks to the low voltage fluctuation thus damage to anode beam and anode rod can be minimized and curved hood can also be minimized, so great maintenance fee can be saved.
source: http://www.anodejackingframe.com/productnew/beam-busbar-jacking-frame.html
http://www.anodejackingframe.com/productnew/beam-busbar-jacking-frame.html
评论
发表评论